Alcatel-Lucent 1665 Installation Manual page 295

WDMX setup and testing: integration procedures
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
6
Click Select, then select REMAID and the port will appear on the right side of the screen,
click on the Port to highlight it then click Select.
........................................................................................................................................................................................................................
7
Click Select for the Add/Drop port, expand the circuit pack (OMD5/8) and click on the
Port and the port will appear on the right side of the screen, click on the Port to highlight
it then click Select.
Note:
........................................................................................................................................................................................................................
8
Click Next, then Finish and complete the cross-connection by clicking on Yes in the
confirmation window.
........................................................................................................................................................................................................................
9
Connect fibers from Test port to selected channel on LNW785, while observing optical
power requirements and cleaning procedures.
........................................................................................................................................................................................................................
10
Repeat
........................................................................................................................................................................................................................
11
Connect the Transmit fibers on the LNW785 at each end, following proper fiber cleaning
procedures.
........................................................................................................................................................................................................................
12
Connect the Receive fibers on the LNW785 at each end, while observing optical power
requirements and cleaning procedures.
Result:
........................................................................................................................................................................................................................
13
If adding a span in the other direction using the LNW785 repeat
otherwise continue.
........................................................................................................................................................................................................................
14
Perform end-to-end testing. Follow the end to end testing procedures determined by the
input test signal. If the test signal is the Alcatel-Lucent 1665 DMX as part of a ring,
proceed to
locate the appropriate procedure
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 2 March 2008
The port is determined by the test signal wavelength documented in
Step 2 to Step 9 at the remote Network Element.
Span is in-service
Chapter 6, "OC-3/12/48 Ring setup and testing: integration procedures"
Turn-up and test the LNW785 8 channel OMD
Step 1 through
Step 1.
Step 12,
and
7 - 5