Alcatel-Lucent 1665 Installation Manual page 146

Powering and initial circuit pack installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
3
Place the LNW80 circuit pack into the M1 slot on the Alcatel-Lucent 1665 DMX High-
Capacity shelf. Do NOT engage the circuit pack in the backplane connector.
........................................................................................................................................................................................................................
4
Remove the second LNW80 from the packing material.
........................................................................................................................................................................................................................
5
Identify the M2 slot on the Alcatel-Lucent 1665 DMX High-Capacity shelf. See
Figure 2-2, "Alcatel-Lucent 1665 DMX High-Capacity shelf" (p.
........................................................................................................................................................................................................................
6
Place the second LNW80 circuit pack into the M2 slot on the Alcatel-Lucent 1665 DMX
High-Capacity shelf. Do NOT engage the circuit pack in the backplane connector.
Important!
to provide proper air flow for cooling. Always use Main-1 (M1) for shelves equipped with
only one main pack.
........................................................................................................................................................................................................................
7
Check off the appropriate box in
E O
N D
........................................................................................................................................................
LNW785 OMD5/8 8-channel low-loss DWDM Optical Mux/Demux
Follow this procedure to install the LNW785 circuit packs in the Alcatel-Lucent 1665
DMX High-Capacity shelf. The LNW785 OMD5/8 circuit pack
multiplexes/demultiplexes up to 8 DWDM optical channels spaced 100 GHz apart,
ranging from 1530 to 1536 nm.
Note:
OMD5/8 circuit packs. This shelf cover is larger and provides more space to prevent
fibers from touching the front cover when the cover is closed.
........................................................................................................................................................................................................................
1
Refer to the engineering job specification. Identify the proper function group slots where
LNW785 circuit packs will be installed.
........................................................................................................................................................................................................................
2
Remove the first LNW785 circuit pack from the packing material.
............................................................................................................................................................................................................................................................
2 - 1 8
If any of the Main slots are to remain unequipped, install a blank circuit pack
S
F T E P S
Shelf cover (comcode 849068358) is required for shelves equipped with
Appendix E, "Installation
Initial circuit pack installation
2-11).
checklist".
365-372-304R7.1
Issue 2 March 2008