Alcatel-Lucent 1665 Installation Manual page 166

Software download and circuit pack installation
............................................................................................................................................................................................................................................................
Tools, test equipment and accessories
Listed below are the required tools, test equipment and accessories.
Quantity
1
1
PC minimum requirements
It is anticipated that most customers will dedicate a laptop or personal computer (PC) to
run the WaveStar
suffice. The following table shows the requirements for the computer:
............................................................................................................................................................................................................................................................
3 - 2
Description
Personal Computer (PC)
CIT Interface Cables
Serial Connection
OSI LAN Connection
LBOs
®
CIT software. However, any properly configured computer will also
Comments
Required to run the WaveStar
PC minimum requirements (p.
8-ft. long RJ45 to 9-pin D-sub serial cable
(Comcode 848748869). Required to connect the
PC to the CIT jack on the front of the SYSCTL
circuit pack.
CAT5 Ethernet cable with either a 10/100 hub or a
cross-over cable for the
ports
20-dB (for LNW60), 15-dB, 10-dB and 5-dB
LBOs are required when looping back the main
OLIUs on themselves.
®
CIT software. See
3-2).
or
LAN CIT IAO LAN
365-372-304R7.1
Issue 2 March 2008