Alcatel-Lucent 1665 Installation Manual page 304

WDMX setup and testing: integration procedures
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
4
Provision the PTM/OTU-2
Select Configuration --> Equipment from the System View
........................................................................................................................................................................................................................
5
Click the "+" next to Main 1 circuit pack to expand the list.
........................................................................................................................................................................................................................
6
Highlight the PTM and click Select.
........................................................................................................................................................................................................................
7
Enter the Frequency in the Expected Frequency and click Apply, then Close.
Note:
column in
........................................................................................................................................................................................................................
8
Create OCH Cross-connections
Select Configuration --> OCH Cross-connections from the System View
........................................................................................................................................................................................................................
9
Select the Create a new OCH cross-connection radio button in the OCH Cross-
Connection Wizard. Click Next.
........................................................................................................................................................................................................................
10
Click the 2-way Add/Drop radio button from the cross-connection list. Click Next.
........................................................................................................................................................................................................................
11
Click Select and expand the circuit pack list by clicking the "+" next to Main 1, highlight
Port 1 OTU-2 and the port will appear on the right side of the screen, click on the AID to
highlight it then click Select.
........................................................................................................................................................................................................................
12
Click Select for the Add/Drop port, expand the circuit pack (OMD5/8) and click on the
Port (the port must match Main 1 OTU-2 port) and the port will appear on the right side of
the screen, click on the AID to highlight it then click Select.
........................................................................................................................................................................................................................
13
Connect the fibers from Main 1/Main2 PTM to the corresponding channel in the LNW785
while observing proper optical levels, fiber cleaning procedures and fiber routing in the
shelf.
............................................................................................................................................................................................................................................................
7 - 1 4
The frequency is determined by the PTM inserted in Port 9. See the LNW705
Table 7-1, "Channel/port assignments" (p. 7-18)
Connecting the ring (Mains) to the WDMX
for acceptable values.
Issue 2 March 2008
365-372-304R7.1