Alcatel-Lucent 1665 Installation Manual page 172

Software download and circuit pack installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
9
Attach the fiber bracket to the blank pack with the hardware provided.
Note:
........................................................................................................................................................................................................................
10
If there are any FAULT LEDs on or flashing on any of the inserted circuit packs, press the
UPD/INIT pushbutton on the SYSCTL circuit pack.
Result:
update the system and should clear all standing alarms.
........................................................................................................................................................................................................................
11
If FAULT LEDs remain lit on any of the inserted circuit packs, replace the respective
circuit pack.
........................................................................................................................................................................................................................
12
Any other alarms will be cleared later on in this chapter.
........................................................................................................................................................................................................................
13
Check off the appropriate box in
E O
N D
........................................................................................................................................................
............................................................................................................................................................................................................................................................
3 - 8
The bracket must be positioned with the LC openings in the down position.
The operation of the UPD/INIT pushbutton on the SYSCTL circuit pack will
S
F T E P S
Appendix E, "Installation
Circuit pack installation
checklist".
365-372-304R7.1
Issue 2 March 2008