Alcatel-Lucent 1665 Installation Manual page 291

7 WDMX setup and testing:
integration procedures
Overview
Purpose
This chapter is used to verify WDMX connectivity between Alcatel-Lucent 1665 Data
Multiplexer (Alcatel-Lucent 1665 DMX) nodes. The chapter includes the LNW785 8
channel Optical Multiplexer Demultiplexer (OMD)and the LNW705 XM10G/8
Muxponder circuit packs. It is not intended to replace acceptance test procedures.
The testing performed in this procedure uses an OC-48 test set. If the OC48 PTM and test
sets are unavailable, other rates or signals can be substituted, i.e., OC-3/-12 or GigE. If
additional provisioning procedures are desired, refer to 365-372-301 Alcatel-Lucent 1665
Data Multiplexer (DMX) User Operations Guide and 365-373-302 Alcatel-Lucent 1665
Data Multiplexer (DMX) Alarm Messages and Trouble Clearing Guide for detailed
troubleshooting procedures.
Contents
This chapter provides information on the following topics:
Turn-up and test the LNW785 8 channel OMD
Turn up and test the LNW705 muxponder
Integrating the LNW705 into the LNW785
Connecting the ring (Mains) to the WDMX
Removing provisioning and equipage from the LNW705 and LNW785
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 2 March 2008
7-4
7-7
7-10
7-12
7-16
7 - 1