Alcatel-Lucent 1665 Installation Manual page 224

Installation tests
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
22
Ignore the flashing fault LED on the Ethernet circuit pack and any alarms on the shelf.
........................................................................................................................................................................................................................
23
Watch for the link LED to light on the PC's Ethernet card or wait for 30 seconds.
........................................................................................................................................................................................................................
24
Login to the shelf using the OSI connection.
Result:
........................................................................................................................................................................................................................
25
Log out of the Alcatel-Lucent 1665 DMX shelf.
........................................................................................................................................................................................................................
26
Repeat this procedure starting at
RJ45 patch panel connected to the LNW66 under test, then continue on to
........................................................................................................................................................................................................................
27
Disconnect the PC from the RJ45 patch panel and the Alcatel-Lucent 1665 DMX LAN
port from the RJ45 patch panel.
........................................................................................................................................................................................................................
28
Connect the Front CIT cable between the PC and the CIT/RS 232 jack of System
Controller and login to the shelf using the serial connection.
........................................................................................................................................................................................................................
29
Select Configuration -> Update System... -> Update All.
Result:
on the Alcatel-Lucent 1665 DMX shelf will also clear.
........................................................................................................................................................................................................................
30
Select Configuration -> Data -> Delete Virtual Switch.
........................................................................................................................................................................................................................
31
Choose the LNW66 circuit pack and click Select.
........................................................................................................................................................................................................................
32
Select the VRTSW ID and click Apply.
............................................................................................................................................................................................................................................................
4 - 4 0
Successful login to the Alcatel-Lucent 1665 DMX.
Step 21
The flashing fault LED on the Ethernet circuit pack will clear and any alarms
LNW66, LNW71 and LNW74 (10/100T) TX ethernet cabling
for the remaining Ethernet connections on the
testing
Step 27.
365-372-304R7.1
Issue 2 March 2008