Software download and circuit pack installation
............................................................................................................................................................................................................................................................
Procedure
Proceed as follows:
........................................................................................................................................................................................................................
1
Use the WaveStar
modified, enabled or disabled, using a Graphical connection through the serial or OSI
cable.
........................................................................................................................................................................................................................
2
On the System View menu, select Administration > Data Communications
Result:
........................................................................................................................................................................................................................
3
In the Data Communications window, click on the TCP/IP tab at the top of the window.
Result:
........................................................................................................................................................................................................................
4
Verify that TCP/IP is properly provisioned and enabled for the required LAN port(s).
........................................................................................................................................................................................................................
5
In the Data Communications window, click on the TCP/IP Gateway tab at the top of the
window.
Result:
........................................................................................................................................................................................................................
6
From your work instructions, determine which IP calling addresses will be allowed to
access the Alcatel-Lucent 1665 DMX TL1 TCP/IP GNE.
........................................................................................................................................................................................................................
7
Use the instructions on the screen to add, modify, or delete a gateway host from the
TCP/IP Gateway Host List.
The following parameters apply:
The OS host IP address which is four dot-separated decimal numbers, each ranging
•
from 0 to 255.
The OS Host Name which may consist of 1 to 24 alpha-numeric characters.
•
The OS Type which may consist of standard types or listed as other.
•
Repeat this step for each of the Host IP address you want to authorize for access to the
1665 DMX TL1 TCP/IP GNE. There may be up to 50 provisioned entries in the list.
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 2 March 2008
®
CIT to log in to the Alcatel-Lucent 1665 DMX TL1 TCP/IP GNE to be
The Data Communications window opens.
The TCP/IP parameters display.
The TCP/IP Gateway parameters display.
Provision/enable/disable the Alcatel-Lucent 1665 DMX as
a TL1 TCP/IP GNE
3 - 1 9