IBM NeXtScale nx360 M4 Installation And Service Manual page 385

2. Make sure that DSA and BMC/IMM are at the
latest level.
166-815-001 IMM I2C Test Aborted
Explanation: Invalid data field in Request.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the
latest level.
166-816-001 IMM I2C Test Aborted
Explanation: Command illegal for specified sensor or
record type.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the
latest level.
166-817-001 IMM I2C Test Aborted
Explanation: Command response could not be
provided.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the
latest level.
166-815-001 • 166-821-001
166-818-001 IMM I2C Test Aborted
Explanation: Cannot execute duplicated request.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the
latest level.
166-819-001 IMM I2C Test Aborted
Explanation: Command response could not be
provided. SDR Repository in?update mode.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the
latest level.
166-820-001 IMM I2C Test Aborted
Explanation: Command response could not be
provided. Device in firmware update mode.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the
latest level.
166-821-001 IMM I2C Test Aborted
Explanation: Command response could not be
provided. BMC initialization in progress.
Severity: Warning
Serviceable: Yes
Appendix C. DSA diagnostic test results
367