IBM NeXtScale nx360 M4 Installation And Service Manual page 273

3. Replace the SAS cable.
4. Check backplane cable connection.
5. Replace the RAID adapter.
6. Replace the hard disk drive that is indicated by a
lit status LED.
806f050d-0407ffff Array
[ComputerSystemElementName] is in
critical condition. (1U Storage HDD2)
Explanation: This message is for the use case when an
implementation has detected that an Array is Critical.
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0174
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Make sure that the RAID adapter firmware and
hard disk drive firmware are at the latest level.
2. Make sure that the SAS cable is connected
correctly.
3. Replace the SAS cable.
4.
Check backplane cable connection.
5. Replace the RAID adapter.
6. Replace the hard disk drive that is indicated by a
lit status LED.
806f050d-0408ffff Array
[ComputerSystemElementName] is in
critical condition. (1U Storage HDD3)
Explanation: This message is for the use case when an
implementation has detected that an Array is Critical.
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0174
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Make sure that the RAID adapter firmware and
hard disk drive firmware are at the latest level.
2. Make sure that the SAS cable is connected
correctly.
3. Replace the SAS cable.
4. Check backplane cable connection.
5. Replace the RAID adapter.
806f050d-0407ffff • 806f050d-040affff
6. Replace the hard disk drive that is indicated by a
lit status LED.
806f050d-0409ffff
Explanation: This message is for the use case when an
implementation has detected that an Array is Critical.
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0174
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Make sure that the RAID adapter firmware and
hard disk drive firmware are at the latest level.
2. Make sure that the SAS cable is connected
correctly.
3. Replace the SAS cable.
4. Check backplane cable connection.
5. Replace the RAID adapter.
6. Replace the hard disk drive that is indicated by a
lit status LED.
806f050d-040affff
Explanation: This message is for the use case when an
implementation has detected that an Array is Critical.
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0174
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1.
Make sure that the RAID adapter firmware and
hard disk drive firmware are at the latest level.
2.
Make sure that the SAS cable is connected
correctly.
3.
Replace the SAS cable.
4. Check backplane cable connection.
5. Replace the RAID adapter.
6. Replace the hard disk drive that is indicated by a
lit status LED.
Appendix A. Integrated Management Module II (IMM2) error messages
Array
[ComputerSystemElementName] is in
critical condition. (1U Storage HDD4)
Array
[ComputerSystemElementName] is in
critical condition. (1U Storage HDD5)
255