IBM NeXtScale nx360 M4 Installation And Service Manual page 370

201-867-000 • 201-868-001
201-867-000 Standalone Memory Test Aborted
Explanation: EFI/SAL: Buffer not allocated.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
201-867-001 Standalone Memory Test Aborted
Explanation: EFI/SAL: Buffer not allocated.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
201-867-002 Standalone Memory Test Aborted
Explanation: EFI/SAL: Buffer not allocated.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
352
IBM NeXtScale nx360 M4 Type 5455: Installation and Service Guide
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
201-867-003 Standalone Memory Test Aborted
Explanation: EFI/SAL: Buffer not allocated.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
201-868-000 Standalone Memory Test Aborted
Explanation: EFI/SAL: Buffer allocated in
GetMemoryMap too small.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
201-868-001 Standalone Memory Test Aborted
Explanation: EFI/SAL: Buffer allocated in
GetMemoryMap too small.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No