IBM NeXtScale nx360 M4 Installation And Service Manual page 287

CIM Information: Prefix: PLAT and ID: 0146
SNMP Trap ID: 0
Automatically notify Support: No
User response:
1. Make sure that the fans are operating, that there
are no obstructions to the airflow, that the air baffles
are in place and correctly installed, and that the
server cover is installed and completely closed.
2. Make sure that ambient temperature is within the
specifications.
3. If a fan has failed, complete the action for a fan
failure.
4. Replace DIMM n. (n = DIMM number)
806f0a0c-2007ffff An Over-Temperature Condition
has been detected on the
[PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
(DIMM 7)
Explanation: This message is for the use case when an
implementation has detected an Over Temperature
Condition for Memory that has been Detected.
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0146
SNMP Trap ID: 0
Automatically notify Support: No
User response:
1. Make sure that the fans are operating, that there
are no obstructions to the airflow, that the air baffles
are in place and correctly installed, and that the
server cover is installed and completely closed.
2. Make sure that ambient temperature is within the
specifications.
3. If a fan has failed, complete the action for a fan
failure.
4. Replace DIMM n. (n = DIMM number)
806f0a0c-2008ffff An Over-Temperature Condition
has been detected on the
[PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
(DIMM 8)
Explanation: This message is for the use case when an
implementation has detected an Over Temperature
Condition for Memory that has been Detected.
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
806f0a0c-2007ffff • 806f0a13-0302ffff
CIM Information: Prefix: PLAT and ID: 0146
SNMP Trap ID: 0
Automatically notify Support: No
User response:
1. Make sure that the fans are operating, that there
are no obstructions to the airflow, that the air baffles
are in place and correctly installed, and that the
server cover is installed and completely closed.
2. Make sure that ambient temperature is within the
specifications.
3. If a fan has failed, complete the action for a fan
failure.
4. Replace DIMM n. (n = DIMM number)
806f0a13-0301ffff
Explanation: This message is for the use case when an
implementation has detected a Bus Fatal Error.
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0244
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1. Reseat the microprocessor, and then restart the
server.
2. Replace microprocessor n. (n = microprocessor
number)
806f0a13-0302ffff
Explanation: This message is for the use case when an
implementation has detected a Bus Fatal Error.
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0244
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1. Reseat the microprocessor, and then restart the
server.
2. Replace microprocessor n. (n = microprocessor
number)
Appendix A. Integrated Management Module II (IMM2) error messages
A Fatal Bus Error has occurred on
system [ComputerSystemElementName].
(CPU 1 PECI)
A Fatal Bus Error has occurred on
system [ComputerSystemElementName].
(CPU 2 PECI)
269