IBM NeXtScale nx360 M4 Installation And Service Manual page 207

User response: Complete the following steps until the
problem is solved:
1. Make sure that the correct login ID and password
are being used.
2. Have the system administrator reset the login ID or
password.
40000011-00000000 Security: Login ID: [arg1] had
[arg2] login failures from CLI at [arg3].
Explanation: This message is for the use case where a
user has failed to log in to a Management Controller
from the Legacy CLI.
Severity: Warning
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0017
SNMP Trap ID: 30
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
1. Make sure that the correct login ID and password
are being used.
2. Have the system administrator reset the login ID or
password.
40000012-00000000 Remote access attempt failed.
Invalid userid or password received.
Userid is [arg1] from WEB browser at IP
address [arg2].
Explanation: This message is for the use case where a
remote user has failed to establish a remote control
session from a Web browser session.
Severity: Info
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0018
SNMP Trap ID: 30
Automatically notify Support: No
User response: Make sure that the correct login ID
and password are being used.
40000013-00000000 Remote access attempt failed.
Invalid userid or password received.
Userid is [arg1] from TELNET client at
IP address [arg2].
Explanation: This message is for the use case where a
user has failed to log in to a Management Controller
from a telnet session.
Severity: Info
40000011-00000000 • 40000016-00000000
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0019
SNMP Trap ID: 30
Automatically notify Support: No
User response: Make sure that the correct login ID
and password are being used.
40000014-00000000
Explanation: This message is for the use case where a
Management Controller Event Log on a system is
cleared by a user.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0020
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000015-00000000
Explanation: This message is for the use case where a
Management Controller reset is initiated by a user.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0021
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000016-00000000
Explanation: This message is for the use case where a
Management Controller IP address and configuration
has been assigned by the DHCP server.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0022
Appendix A. Integrated Management Module II (IMM2) error messages
The [arg1] on system [arg2]
cleared by user [arg3].
Management Controller [arg1]
reset was initiated by user [arg2].
ENET[[arg1]] DHCP-
HSTN=[arg2], DN=[arg3], IP@=[arg4],
SN=[arg5], GW@=[arg6], DNS1@=[arg7] .
189