IBM NeXtScale nx360 M4 Installation And Service Manual page 206

4000000b-00000000 • 40000010-00000000
Automatically notify Support: No
User response: Information only; no action is
required.
4000000b-00000000 IP address of default gateway
modified from [arg1] to [arg2] by user
[arg3].
Explanation: This message is for the use case where a
user modifies the default gateway IP address of a
Management Controller.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0011
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
4000000c-00000000 OS Watchdog response [arg1] by
[arg2] .
Explanation: This message is for the use case where
an OS Watchdog has been enabled or disabled by a
user.
Severity: Warning
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0012
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
4000000d-00000000 DHCP[[arg1]] failure, no IP
address assigned.
Explanation: This message is for the use case where a
DHCP server fails to assign an IP address to a
Management Controller.
Severity: Warning
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0013
SNMP Trap ID:
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
188
IBM NeXtScale nx360 M4 Type 5455: Installation and Service Guide
1. Make sure that the IMM network cable is
connected.
2. Make sure that there is a DHCP server on the
network that can assign an IP address to the IMM.
4000000e-00000000 Remote Login Successful. Login
ID: [arg1] from [arg2] at IP address
[arg3].
Explanation: This message is for the use case where a
user successfully logs in to a Management Controller.
Severity: Info
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0014
SNMP Trap ID: 30
Automatically notify Support: No
User response: Information only; no action is
required.
4000000f-00000000 Attempting to [arg1] server [arg2]
by user [arg3].
Explanation: This message is for the use case where a
user is using the Management Controller to perform a
power function on the system.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0015
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000010-00000000 Security: Userid: [arg1] had [arg2]
login failures from WEB client at IP
address [arg3].
Explanation: This message is for the use case where a
user has failed to log in to a Management Controller
from a web browser.
Severity: Warning
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0016
SNMP Trap ID: 30
Automatically notify Support: No