IBM NeXtScale nx360 M4 Installation And Service Manual page 210

Hide thumbs Also See for NeXtScale nx360 M4:
Table of Contents

Advertisement

40000022-00000000 • 40000026-00000000
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0033
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000022-00000000
SSL data in the Management
Controller [arg1] configuruation data is
invalid. Clearing configuration data
region and disabling SSL.
Explanation: This message is for the use case where a
Management Controller has detected invalid SSL data
in the configuration data and is clearing the
configuration data region and disabling the SSL.
Severity: Error
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0034
SNMP Trap ID: 22
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
1.
Make sure that the certificate that you are
importing is correct.
2.
Try to import the certificate again.
40000023-00000000
Flash of [arg1] from [arg2]
succeeded for user [arg3] .
Explanation: This message is for the use case where a
user has successfully flashed the firmware component
(MC Main Application, MC Boot ROM, BIOS,
Diagnostics, System Power Backplane, Remote
Expansion Enclosure Power Backplane, Integrated
System Management Processor, or Remote Expansion
Enclosure Processor) from the interface and IP address (
%d.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0035
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
192
IBM NeXtScale nx360 M4 Type 5455: Installation and Service Guide
40000024-00000000
Flash of [arg1] from [arg2] failed
for user [arg3].
Explanation: This message is for the use case where a
user has not flashed the firmware component from the
interface and IP address due to a failure.
Severity: Info
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0036
SNMP Trap ID: 22
Automatically notify Support: No
User response: Information only; no action is
required.
40000025-00000000
The [arg1] on system [arg2] is
75% full.
Explanation: This message is for the use case where a
Management Controller Event Log on a system is 75%
full.
Severity: Info
Alert Category: System - Event Log 75% full
Serviceable: No
CIM Information: Prefix: IMM and ID: 0037
SNMP Trap ID: 35
Automatically notify Support: No
User response: Information only; no action is
required.
40000026-00000000
The [arg1] on system [arg2] is
100% full.
Explanation: This message is for the use case where a
Management Controller Event Log on a system is 100%
full.
Severity: Info
Alert Category: System - Event Log 75% full
Serviceable: No
CIM Information: Prefix: IMM and ID: 0038
SNMP Trap ID: 35
Automatically notify Support: No
User response: To avoid losing older log entries, save
the log as a text file and clear the log.

Advertisement

Table of Contents
loading

Table of Contents