IBM NeXtScale nx360 M4 Installation And Service Manual page 166

4. Remove the cover (see "Removing the compute node cover" on page 110).
5. Pull the plunger of the 2.5-inch hard disk drive cage outward and rotate the
Figure 67. Lift the 2.5-inch hard disk drive cage upward
6. Push this latch gently outward a little to let the screw un-hold by the latch
Figure 68. 2.5-inch hard disk drive removal
7. Pull the plunger of the 2.5-inch hard disk drive cage outward and rotate the
Figure 69. Put the 2.5-inch hard disk drive cage downward
148
IBM NeXtScale nx360 M4 Type 5455: Installation and Service Guide
cage upward.
2.5-inch Hard disk
drive cage
2
hole. Then, remove the hard disk drive.
Release latch
1
cage downward until the cage snaps into place.
2
1
1
2