IBM NeXtScale nx360 M4 Installation And Service Manual page 230

80010901-0702ffff • 80010901-1001ffff
1. Make sure there is a node filler correctly installed
for the empty node slot.
2. Make sure the air baffles are placed and correctly
installed; and make sure the node cover is installed
and completely closed.
3. Make sure the fans are operating, and there are no
obstructions to the airflow (both front and rear of
the server).
4. Reduce the Ambient temperature. The system must
be operating within the specifications. (see Features
and specifications for more information)
80010901-0702ffff Numeric sensor
[NumericSensorElementName] going
high (upper critical) has asserted.
(DIMM AB Temp)
Explanation: This message is for the use case when an
implementation has detected an Upper Critical sensor
going high has asserted.
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0494
SNMP Trap ID: 0
Automatically notify Support: No
User response:
1. Make sure there is a node filler correctly installed
for the empty node slot.
2. Make sure the air baffles are placed and correctly
installed; and make sure the node cover is installed
and completely closed.
3. Make sure the fans are operating, and there are no
obstructions to the airflow (both front and rear of
the server).
4. Reduce the Ambient temperature. The system must
be operating within the specifications. (see Features
and specifications for more information)
80010901-0703ffff Numeric sensor
[NumericSensorElementName] going
high (upper critical) has asserted. (CPU1
VR Temp VCO)
Explanation: This message is for the use case when an
implementation has detected an Upper Critical sensor
going high has asserted.
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0494
SNMP Trap ID: 0
212
IBM NeXtScale nx360 M4 Type 5455: Installation and Service Guide
Automatically notify Support: No
User response:
1. Make sure there is a node filler correctly installed
for the empty node slot.
2. Make sure the air baffles are placed and correctly
installed; and make sure the node cover is installed
and completely closed.
3. Make sure the fans are operating, and there are no
obstructions to the airflow (both front and rear of
the server).
4. Reduce the Ambient temperature. The system must
be operating within the specifications. (see Features
and specifications for more information)
80010901-0704ffff Numeric sensor
[NumericSensorElementName] going
high (upper critical) has asserted. (HDD
Inlet Temp)
Explanation: This message is for the use case when an
implementation has detected an Upper Critical sensor
going high has asserted.
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0494
SNMP Trap ID: 0
Automatically notify Support: No
User response:
1. Make sure there is a node filler correctly installed
for the empty node slot.
2. Make sure the air baffles are placed and correctly
installed; and make sure the node cover is installed
and completely closed.
3. Make sure the fans are operating, and there are no
obstructions to the airflow (both front and rear of
the server).
4. Reduce the Ambient temperature. The system must
be operating within the specifications. (see Features
and specifications for more information)
80010901-1001ffff Numeric sensor
[NumericSensorElementName] going
high (upper critical) has asserted. (PCI
Riser 1 Temp)
Explanation: This message is for the use case when an
implementation has detected an Upper Critical sensor
going high has asserted.
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes