IBM NeXtScale nx360 M4 Installation And Service Manual page 245

UEFI(POST) error code for this event can be found in
the logged IMM message text. Please refer to the
UEFI(POST) error code in the "UEFI(POST) error code"
section of the Information Center for the appropriate
user response. Firmware Error : Sys Boot Status :
806f000f-220102ff Subsystem
[MemoryElementName] has insufficient
memory for operation. (ABR Status)
Explanation: This message is for the use case when an
implementation has detected that the usable Memory is
insufficient for operation.
Severity: Error
Alert Category: Critical - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0132
SNMP Trap ID: 41
Automatically notify Support: No
User response: This is a UEFI detected event. The
UEFI(POST) error code for this event can be found in
the logged IMM message text. Please refer to the
UEFI(POST) error code in the "UEFI(POST) error code"
section of the Information Center for the appropriate
user response. Firmware Error : Sys Boot Status :
806f000f-220103ff The System
[ComputerSystemElementName]
encountered firmware error -
unrecoverable boot device failure. (ABR
Status)
Explanation: This message is for the use case when an
implementation has detected that System Firmware
Error Unrecoverable boot device failure has occurred.
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0770
SNMP Trap ID: 5
Automatically notify Support: No
User response: This is a UEFI detected event. The
UEFI(POST) error code for this event can be found in
the logged IMM message text. Please refer to the
UEFI(POST) error code in the "UEFI(POST) error code"
section of the Information Center for the appropriate
user response. Firmware Error : Sys Boot Status :
806f000f-220102ff • 806f000f-22010aff
806f000f-220104ff
Explanation: This message is for the use case when an
implementation has detected that a fatal motherboard
failure in the system.
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0795
SNMP Trap ID: 50
Automatically notify Support: No
User response: This is a UEFI detected event. The
UEFI diagnostic code for this event can be found in the
logged IMM message text. Please refer to the
UEFI(POST) error code in the "UEFI(POST) error code"
section of the Info Center for the appropriate user
response. Firmware Error : Sys Boot Status :
806f000f-220107ff
Explanation: This message is for the use case when an
implementation has detected that System Firmware
Error Unrecoverable Keyboard failure has occurred.
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0764
SNMP Trap ID: 50
Automatically notify Support: No
User response: This is a UEFI detected event. The
UEFI(POST) error code for this event can be found in
the logged IMM message text. Please refer to the
UEFI(POST) error code in the "UEFI(POST) error code"
section of the Information Center for the appropriate
user response. Firmware Error : Sys Boot Status :
806f000f-22010aff
Explanation: This message is for the use case when an
implementation has detected that System Firmware
Error No video device detected has occurred.
Severity: Error
Appendix A. Integrated Management Module II (IMM2) error messages
The System
[ComputerSystemElementName]has
encountered a motherboard failure.
(ABR Status)
The System
[ComputerSystemElementName]
encountered firmware error -
unrecoverable keyboard failure. (ABR
Status)
The System
[ComputerSystemElementName]
encountered firmware error - no video
device detected. (ABR Status)
227