IBM NeXtScale nx360 M4 Installation And Service Manual page 311

816f040c-2007ffff [PhysicalMemoryElementName]
Enabled on Subsystem
[MemoryElementName]. (DIMM 7)
Explanation: This message is for the use case when an
implementation has detected that Memory has been
Enabled.
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f040c-2008ffff [PhysicalMemoryElementName]
Enabled on Subsystem
[MemoryElementName]. (DIMM 8)
Explanation: This message is for the use case when an
implementation has detected that Memory has been
Enabled.
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f040c-2581ffff [PhysicalMemoryElementName]
Enabled on Subsystem
[MemoryElementName]. (All DIMMS)
Explanation: This message is for the use case when an
implementation has detected that Memory has been
Enabled.
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only. One of
the DIMMs :
816f040c-2007ffff • 816f0507-0302ffff
816f0413-2582ffff
Explanation: This message is for the use case when an
implementation has detected a PCI PERR recovered.
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0233
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f0507-0301ffff
Explanation: This message is for the use case when an
implementation has Recovered from a Processor
Configuration Mismatch.
Severity: Info
Alert Category: Critical - CPU
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0063
SNMP Trap ID: 40
Automatically notify Support: No
User response: No action; information only.
816f0507-0302ffff
Explanation: This message is for the use case when an
implementation has Recovered from a Processor
Configuration Mismatch.
Severity: Info
Alert Category: Critical - CPU
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0063
SNMP Trap ID: 40
Automatically notify Support: No
User response: No action; information only.
Appendix A. Integrated Management Module II (IMM2) error messages
A PCI PERR recovery has occurred
on system
[ComputerSystemElementName]. (PCIs)
[ProcessorElementName] has
Recovered from a Configuration
Mismatch. (CPU 1)
[ProcessorElementName] has
Recovered from a Configuration
Mismatch. (CPU 2)
293