IBM NeXtScale nx360 M4 Installation And Service Manual page 208

40000017-00000000 • 4000001c-00000000
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000017-00000000 ENET[[arg1]] IP-
Cfg:HstName=[arg2], IP@=[arg3]
,NetMsk=[arg4], GW@=[arg5] .
Explanation: This message is for the use case where a
Management Controller IP address and configuration
has been assigned statically using user data.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0023
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000018-00000000 LAN: Ethernet[[arg1]] interface is
no longer active.
Explanation: This message is for the use case where a
Management Controller ethernet interface is no longer
active.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0024
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000019-00000000 LAN: Ethernet[[arg1]] interface is
now active.
Explanation: This message is for the use case where a
Management Controller ethernet interface is now
active.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0025
SNMP Trap ID:
Automatically notify Support: No
190
IBM NeXtScale nx360 M4 Type 5455: Installation and Service Guide
User response: Information only; no action is
required.
4000001a-00000000 DHCP setting changed to [arg1]
by user [arg2].
Explanation: This message is for the use case where a
user changes the DHCP setting.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0026
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
4000001b-00000000 Management Controller [arg1]:
Configuration restored from a file by
user [arg2].
Explanation: This message is for the use case where a
user restores a Management Controller configuration
from a file.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0027
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
4000001c-00000000 Watchdog [arg1] Screen Capture
Occurred .
Explanation: This message is for the use case where
an operating system error has occurred and the screen
was captured.
Severity: Info
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0028
SNMP Trap ID: 22
Automatically notify Support: No
User response: If there was no operating-system error,
complete the following steps until the problem is
solved:
1. Reconfigure the watchdog timer to a higher value.