Installation; Getting Started - Konica Minolta FAX 9840 Instruction Manual

Installation

Getting Started

To install the Konica FAX9840, please thoroughly read and follow the instructions
provided in this chapter. There are a number of initial machine settings that should be
made before the machine can operate properly. Please complete these steps before
using the machine.
If you have purchased an option package with the machine, please refer to the docu-
mentation received with that option as well as to the appendices of this handbook.
Where to Install Machine
✔ Place the machine in a dust-free location out of the path of direct sunlight.
✔ Allow sufficient space on each side of the machine to ensure adequate ventilation.
✔ Make sure that both power and telephone outlets are nearby and easily accessible.
✔ Choose a location where relative humidity remains between 20-80% and tem-
perature between 10-32°C (50-90°F).
Unpacking
Before beginning to set up the machine, confirm that all of the items listed below were
included in the facsimile carton. Remove the contents and place the items on a sturdy,
clean surface.
✔ Facsimile unit
✔ Toner cartridge
✔ Image drum unit (inside facsimile unit)
✔ AC power cord
✔ Telephone cord
✔ Document stacker
✔ This handbook
Please refer to the illustration in the Component Identification chapter.
Note: If there is any item missing, immediately contact the dealership nearest you.
26