Options - Konica Minolta FAX 9840 Instruction Manual

Options

MFP PC Interface Kit
The MFP PC Interface Kit is basically a software package that allows machine to
interface with a computer connected via a parallel cable. Once the software is installed
in the computer and a parallel cable attached to connect the two devices, the Konica
FAX can provide fax/modem, printer and scanner operations. (For further details,
please refer to Appendix A.)
Internet Fax & Network Printer/Scanner
The Internet Fax & Network Printer/Scanner enables the unit to operate as a network
printer with a variety of LAN systems and protocols including Novell and Microsoft.
Installation of the NIC enables the option of utilizing Network Print Service: 10-page/
min (600dpi printing with Hiper-W print emulation). It also becomes possible to
receive fax images as e-mails and to transmit fax images as e-mails. (For further details,
please refer to Appendix B.)
ISDN G4 Board
The ISDN G4 Board raises the Konica FAX9840 machine operability to ITU-T G4
classification with digital communications at 64Kbps. Although PSTN settings are
deactivated when installed, the system is equipped with a setting to activate an auto-
matic fallback function that enables communications in either G3 or G4 mode, de-
pending on the classification of the remote machine. This option is dealer installed.
(For further details, please refer to Appendix C.)
G3 Dual Line Function
This function requires the G3 Option Board to be mounted. Like Dual Mode Com-
munication, it is possible to concurrently communicate on two lines. (For further de-
tails, please refer to Appendix D.)
600 dpi Communication
This function requires the optional 8Mbyte memory to be mounted. When mounted,
the Konica FAX9840 can transmit/receive faxes and make copies at a resolution of
600 dpi. (For further details, please refer to Appendix E1.)
87