Konica Minolta FAX 9840 Instruction Manual page 4

Safety
Installation Hints
✔ Install the machine in a dust-free location away from direct sunlight.
✔ Place the machine near an electrical outlet that is easily accessible.
✔ Do not plug the machine into a power source shared by items that produce electric
noise (e.g., air conditioner, etc.).
✔ The design of this machine requires electrical grounding, and is thus supplied
with a three-wire grounded power cord. For your safety as well as others who
may operate the machine, please do not attempt to alter the power cord by modi-
fying the grounding prong.
✔ The Line jack is for connecting the machine to a standard telephone line. To avoid
damage to telephone systems and/or the facsimile machine, do not plug the ma-
chine into anything other than a standard RJ-11C jack.
✔ The TEL jacks on the back of the machine are only suitable for two-wire devices.
Some standard telephones may not respond to incoming signals when connected
to an extension socket.
✔ The machine may not necessarily provide the effective transfer of a call from a
telephone connected to the same line.
✔ The operation of this machine on the same line as that of a telephone or other
devices equipped with an audible warning device or automatic call detector may
result in bell vibration (sporadic ringing) or false tripping of the call detector. If
such a problem occurs, the user is requested to NOT contact the telephone com-
pany.
✔ Adjustment of the electrical/electronic components in the machine requires an
authorized service technician. Do not attempt to make adjustments yourself. Any
alterations made by an individual other than an authorized service technician may
be cause for nullification of the product warranty.
Operation and Maintenance
✔ Aside from the instructions specifically stipulated in the handbook, do not attempt
to disassemble or service this machine, including the lubrication of moving parts.
Please contact an authorized service center for assistance.
✔ Use a soft dry cloth to clean the control panel and main body of the unit. Do not
apply any cleanser to the cloth or surface of the machine.
1