Konica Minolta FAX 9840 Instruction Manual page 19

13 */Tone Key: If the machine is set for pulse dialing, pressing this key will switch
from pulse to tone dialing during the current call. This key can also be used
during programming to create numbers with mixed pulse-tone operation.
14 0/Unique Key: Use this key as "0" when dialing telephone numbers. When pro-
gramming the Sender ID, Location ID, etc., use this key to enter unique charac-
ters: Symbols (! # & ' ( ) * + , - . / : ; = ? · , Umlaut characters (ÄßÑÖÜ), and
Norwegian characters (ÆÅØæåø).
15 Numeric Keypad: These 12 keys work like the keypad on a standard telephone
when dialing a telephone number. They are also used to move to another opera-
tion mode, enter numbers, letters and other characters when programming the
machine, and input speed dial numbers after pressing the Speed Dial key. The "#"
key is used for the creation of groups of telephone numbers for batch transmis-
sion. After a document is loaded, this key can also be used to select previously
programmed groups of telephone numbers for faxing.
16 Redial Key: Press this key to automatically redial the last telephone number di-
aled on the machine.
17 Hook Key: Use this key to open the telephone line for manual dialing with the
numeric keypad or external telephone handset. After pressing the key, it will be
possible to hear the dial tone and dialing code through the machine's speaker.
18 Speed Dial/Search Key: After loading a document for faxing, press this key and
then enter the programmed Speed Dial (One-Touch or 2 or 3-digit) number for the
location. The speed dialing function will automatically dial the telephone number
and transmit the fax. After pressing the Search key, it is possible to search corre-
sponding location IDs when alphanumeric characters are entered.
19 Hyphen Key: Use this key as the "-" character when programming ID and PBX,
public line, international telephone or Earthing/Flashing switches. It is also used
to type the "+" when entering TSI/CSI numbers.
20 Start/Copy Key: Use this key to initiate transmission of a document after loading
the document and selecting the location, start manual fax transmission or recep-
tion, return the machine to normal operation from the Power Save mode, or start
the copying function.
21 Stop Key: Use this key to cancel the operation shown on the display, cancel the
transmission of a fax (press twice within 3sec) or to cancel an alarm (alarm indica-
tor light will illuminate). After loading paper or installing a new toner cartridge/
impact drum unit, press this key to cancel the alarm condition. It can also be used
to return to higher operational layers when programming the machine.
16