Konica Minolta FAX 9840 Instruction Manual page 55

Search
Numeric keypad
External telephone
3 If necessary, press the Start key to begin transmission.
The following messages may be shown on the display during a typical fax transmis-
sion.
(Location): Identity of the remote location such as Personal ID, TSI/CSI, Location
ID or telephone number programmed into the machine.
Calling: Machine is dialing or calling.
Sending: Machine is transmitting a fax.
Result - OK: Fax was transmitted successfully.
Commun. Error: If this or another error message appears, a problem occurred dur-
ing the communication. Try resending the fax. Refer to "Troubleshooting" for assis-
tance.
52
Press Speed Dial key, then enter first character using the One-Touch key.
Dial as if using a telephone. If a mistake is made, press the DEL button to
move the cursor back and re-enter the correct number. Press Start key when
finished.
Operation is as follows when the ISDN G4 board is installed.
Pick up the receiver from its cradle and dial the number. If the receiving
machine is in automatic reception mode, a high-pitched tone will be heard.
If someone answers, request that they press the Start key on their machine.