Table of Contents
Advertisement
PBX Line*: This function must be turned on if the machine is connected to a
PBX. When the function is activated and the access digit function programmed,
the machine will recognize the access digit in the PBX to obtain an outside line.
After dialing the access digit, the machine will pause to wait for an outside line
before dialing the remainder of the telephone number. Available settings are ON
an OFF. Speed access no. 50.
Flash/Earth/Normal*: If the machine is connected to a PBX, this function sets
the method of switching between the flash and earth modes for PBX lines. Avail-
able settings are Normal, Flash and Earth. Speed access no. 51.
Dial Prefix*: If the machine is connected to a PBX, this function is used to inform
the machine of the access number to use for obtaining an outside line from the
PBX. Up to four digits can be input for the prefix number. Speed access no. 52.
* Choice cannot be made when ISDN G4 board is installed.
Incoming Call Parameters
Incoming Ring: This function offers a soft ringing sound through the machine's
built-in speaker when a call is received. If the function is set to OFF, the machine
will not emit a ringing sound during incoming calls. If the function is set to ON,
the machine will only emit a ringing sound when the machine is set to TEL (manual
receive mode) or Ring Response is set to 5-20sec (except 1 ring). When set to
DRC, the machine will emit a ringing sound for each incoming call with the same
tone even if the Distinctive Ring parameter is set to ON. Available settings are
ON, OFF and DRC. Speed access no. 60.
Remote Receive: This function allows switching from telephone to fax mode to
receive and incoming fax. Use the keypad of the optional handset or external
telephone to enter the remote receive number programmed into the machine. The
available settings are: OFF, 00, 11, 22, 33, 44, 55, 66, 77, 88, 99, ** or ##. Speed
access no. 61.
Continuous Tone: When this function is set to ON, it is possible to choose this for
a completion tone at the end of receiving a fax. Pressing the Stop key turns off the
tone. Speed access no. 63.
41
Advertisement
Table of Contents
