Table of Contents
Advertisement
Search Key Dialing
If you are not sure which Speed Dial key is programmed for a certain location, use the
Search key to look through the alphabetical telephone directory of location IDs. After
loading the document(s):
1 Press the Search key, the display will show "Enter 1'st Char."
2 Enter the first letter of the name of the desired location.
3 Repeatedly press the letter key to scroll through the list of location IDs begin-
ning with that letter.
4 When the correct location is found, press the Start key to begin faxing.
Real-Time Dialing
The machine normally dials the entire telephone number of a location at one time.
However, telephone numbers can also be dialed in real time (one digit at a time). To
dial from the machine itself, press the Hook key, and dial using the numeric keypad
on the machine's control panel. Another way to dial in real time is when an external
telephone is connected. Pick up the handset and dial using the keypad on the tele-
phone.
Redialing
If a line is busy or there is no answer, the machine will wait and then automatically
redial the number. Additionally, if the machine is transmitting from memory and a
communication error occurs, it will automatically redial the number and send the fax
again. Manual redialing of the last telephone number called is also possible at any
time by pressing the Redial key on the control panel.
53
Advertisement
Table of Contents
