Konica Minolta FAX 9840 Instruction Manual page 21

Del Key (One-Touch key #30): Use this key to delete characters at the position of
the cursor in the display panel when entering ID, telephone numbers or program-
ming functions.
Caps Key (One-Touch key #31): Use this key to switch between uppercase and
lowercase when entering alphanumeric characters.
Space Key (One-Touch key #36): Use this key to enter spaces when program-
ming the machine. Unlike the Pause key, spaces provide easier reading only and
have no effect on dialing characteristics.
Plus Key (One-Touch key #39): Each fax number entered or programmed into
the machine can be up to 40 digits long. If there is a need to dial a number longer
than 40 digits, it is possible to dial the number using any combination of Speed
Dial numbers or the numeric keypad. To enter a chain dial number into a Speed
Dial number, press the Plus key at the 40th position of the first part of the number
to indicate it is a chain dial number, then complete the process by following the
procedures required for inputting another Speed Dial number (in which the sec-
ond part of the number should be entered).
Pause Key (One-Touch key #40): Use this key to enter automatic 3sec pauses in
dialing when programming telephone numbers. For example, use this key to tell
the machine to wait for an outside or international line to open. (Pauses in a tele-
phone number dialing sequence are indicated by a "P".)
Other: Special character keys (, ; @ _ : / \ . +).
18