Konica Minolta FAX 9840 Instruction Manual page 125

Explanation of Displayed Text
During calling sequence
During fax transmission
Bottom Line of Display (20 characters, left to right)
First 10 characters: Communication activity (e.g., sending, receiving, memory-receiv-
ing)
Second set of characters (2 characters): Communications mode (G3, G4)
Third set of characters (after /): Transmission rate (e.g., 28.8K, 33.6K, 64.0K)
For more detailed information and instructions on how to set/use a machine when the
ISDN G4 Board is installed, please refer to the handbook provided with the ISDN G4
Board.
122
Konica Tokyo
0334567890
CALLING
Konica Tokyo
PAGE 001
SENDING G3/33.6K
--› If Speed Dial ID is played here.
--› Telephone num location
(max. 40 characters)
--› Displayed after calling sequence starts
(PSTN/ISDN)
--› Personal ID, TSI/TID for ISDN G4,
(phone no. of remote characters for phone no. )
--› TX/RX page counter (000-999)
--› See following explanation for bottom
line.