Advertisement
2. Installation procedures
<Installations to models C287/C227>
Follow the installation procedures starting on page
E-2.
<Installations to models 367/287/227>
Follow the installation procedures starting on page
E-4.
<Installations to models C287/C227>
(1) Turn OFF the power switch and unplug the
power cord from the power outlet.
(2) Remove the four caps from the upper rear cover.
(3) Remove the duct cover and the louver from the
upper rear cover.
(4) Remove the upper rear cover. (Nine screws)
(5) Remove the metal plate. (Three screws)
(6) Remove the lower left rear cover. (Two screws)
(7) Remove the knockout from the lower left rear
cover using nippers.
(8) Reinstall the lower left rear cover. (Two screws)
E-2
Advertisement
