Table of Contents
Advertisement
Installation
For Your Safety: Installation Hints
• Install your fax machine in a dust-free location away from
direct sunlight.
• Do not plug your fax machine into a power source shared
by equipment that produces electrical noise (i.e., air
conditioners, etc.).
• Leave electronic adjustments to authorized service
personnel.
• The LINE terminal connects your fax machine to a
standard telephone line. To avoid damage to your
telephone system or to the fax machine, do not plug your
fax machine into anything other than a standard RJ-11C
jack.
• Your fax machine is intended to be grounded electrically
and is equipped with a three-wire grounded power cord.
For your safety, do not attempt to defeat your power cord's
grounding plug.
• The power outlet should be located near the equipment
and should be easily accessible.
• The TEL port on the back of the unit is only suitable for
two-wire devices. Not all standard telephones will respond
to incoming ringing when connected to an extension
socket.
• This equipment may not necessarily provide for the
effective hand-over of a call from a telephone connected
to the same line.
Getting Started
To install your new fax machine, follow the instructions from
the "Unpacking" to the "Programming Required
Information" sections of this user's manual. You must
complete these steps for your fax machine to operate
properly.
If you have purchased an option package for your fax
machine, refer to the documentation you received with that
option for installation instructions.
|
User's Manual
13
Advertisement
Table of Contents
