Power Failures And Memory; Making Copies - Konica Minolta FAX 9840 Instruction Manual

Power Failures and Memory

The Konica FAX9840 is equipped with a battery to prevent the loss of data stored in
memory at the time of a power outage. The typical memory-backup time with a fully
charged battery is 72hr. If data is still held in memory at the time of power restoration,
the machine will continue operations from the point when power was lost (e.g., delayed
transmission, redial waiting conditions, etc. resume from point of power failure). If
the data in memory has been lost at the time of power restoration, the machine will
print out a Power Outage Report. Please refer to the chapter Reports for more
information.

Making Copies

The machine is capable of making up to 99 copies at one time. When loaded with the
recommended paper, the copy stacker capacity is 200 and 10 sheets each for face-
down and face-up stacking, respectively. Documents fed through the automatic docu-
ment feeder (A.D.F.) will be printed at the resolution set by the operator using the
Resolution button [200 × 100dpi (Std), 300 × 300dpi (Fine), 600 × 400dpi (Ex-Fine),
600 × 600dpi (Ex-Fine,option)].
To Make Copies Using A.D.F.
1 Load the document(s) in the document tray.
58