Konica Minolta FAX 9840 Instruction Manual page 73

Sending Relay Broadcast
Before sending documents in a broadcast operation, the 4-digit relay password of the
relay station and 2-digit identification numbers of the remote stations (or groups of
remote stations) must be obtained. After making a relay transmission, the key relay
station can send a report confirming the completion of the broadcast. This report is
sent to the location specified by the telephone number programmed in the Relay Re-
port No. function. For this machine to receive the report, program its telephone num-
ber as the relay report number.
Initiating a Relay Broadcast
1 Load the document(s).
2 Press Menu/Exit to enter Menu.
3 Press
4 Input password (4-digit number) of key relay station, Enter.
5 Input two-digit numbers of remote stations, Enter.
6 Input desired location using the Speed Dial number or numeric keypad, press
Start.
7 The machine will scan the document(s) into memory and begin faxing to the
key relay station.
8 If all memory is used, the display will show "Memory Overflow", "Send
Scanned Pages?"
9 To send scanned pages, press Enter.
Programming Relay Report Destination
1 Press Menu/Exit to enter Menu.
2 Press
3 Press
4 Input telephone number of desired location using numeric keypad (40 charac-
ters max.), press Enter.
5 Press Menu/Exit to return to standby mode.
70
to select Relay Initiate TX, press Enter or
to select Location Program, press Enter or
to select Relay Report No., press Enter or
.
.
.