Konica Minolta FAX 9840 Instruction Manual page 34

Table of Contents

Connecting External Telephone/Answering Machine

1 Plug one end of the telephone cord into the TEL jack (jack located immedi-

ately below the line jack) on the back of the machine.

2 Plug the other end of the cord into the jack on the external device.

Tip: If connecting both a telephone and answering machine, first connect the

answering machine to the facsimile machine, and then use an additional tele-

phone cord to connect the external telephone and answering machine.

Note: The TAD mode must be set in the "ON" position for an answering ma-

chine to work with this facsimile machine. Please refer to "Dialing/Incoming

Call Modes" in this chapter.

Table of Contents