Operation Functions - Konica Minolta FAX 9840 Instruction Manual

Table of Contents

Operation Functions

Remote Diagnosis

The remote diagnostics feature allows service personnel to remotely dial and service

the machine. Available settings are ON and OFF. Speed access no. 14.

Transmission (TX) Mode Default

This function allows the machine's default settings for original document condition

and transmission scanning resolution (Type of Original and Resolution keys, respec-

tively) to be changed. The factory default settings are standard (STD) and normal

(Normal) respectively. If faxes that require some other combination are often sent or

received, use these function settings to adjust machine operations to best fit the situa-

tion. During the programming sequence, the new default combination will be indi-

cated on the control panel. Speed access no. 15.

Memory Full Save

With features like group dialing, "call origination" starts after an entire document or

set of documents is read into memory. If during this process, memory becomes full

and an operator time out seems likely, a message to that effect is shown on the display

if this function is set to ON. If it is set to OFF, data not read into memory is deleted

automatically. Available settings are ON and OFF. Speed access no. 17.

Instant Dial

In the ON state, the document is scanned into memory and dialing starts immediately.

Although the function relies on memory availability, connection to the remote loca-

tion is confirmed and the document transmitted faster when memory is available. If it

is set to OFF, the machine first confirms contact with the remote location and then

transmits the document reading from the document tray (without scanning into

memory). Speed access no. 18.

Restrict Access

This function controls whether or not machine operation is restricted or not. In the

ON state, if restriction ID have been programmed, users must enter a password before

being allowed access to the machine's functions. Set to OFF, no password is required

even if restriction ID have been programmed. Speed access no. 19.

Table of Contents