Faxing To A Single Location - Konica Minolta FAX 9840 Instruction Manual

Tips: A document can be loaded and prepared for transmission while the machine is
sending or receiving another message (as long as the document tray is empty). To do
this, load the document, select the location and press the Start key. The document will
be sent after completion of the current operation.
1 Adjust the document guides to the width of the documents being sent.
2 Neatly stack the documents, and then insert them face down into the docu-
ment tray. Readjust the document guides.
3 The machine will grip the documents and pull them in for transmission, begin-
ning with the bottom page first.
4 If necessary, adjust the resolution (Resolution key) and contrast (Type of Origi-
nal) to provide the best possible quality.
5 Document is ready for faxing or copying
Document Type
Normal
Small type/fine details
Photos or many shades of gray
Document Type
Normal contrast
Contrast is too light
Contrast is too dark

Faxing to a Single Location

1 Load the document(s).
2 Select a location (refer to the following chart).
To Dial Using
One-Touch key
2 or 3-digit dial
Resolution
Standard (STD)
Fine/Ex. Fine
Photo
Contrast
Normal
Light
Dark
Do This
Press the One-Touch key
Press Speed Dial key, then enter Speed Dial number using the numeric
keypad.
51