Table of Contents
Advertisement
www.WorkshopManuals.co.uk
Section F
113 - 1
Reverser Unit - Dismantling
1
Carefully remove piston ring seals.
Note: If the piston ring seals are excessively worn then
check for burrs or damage on the shaft grooves. If necessary
remove burrs with a fine grade abrasion paper and oil.
2
Remove the taper bearing using pullers.
*
3
Remove the thrust bearing and thrust washers.
*
4
Withdraw the gear and splined hub assembly 4 with the
*
needle roller bearing and spacer. Note the location of
the spacer to ensure it is returned to its original position
on re-assembly.
5
Remove the thrust bearing and thrust washers.
*
6
Remove the clutch friction/counter plates retaining
circlip.
7
Remove pressure (end) plate.
9803/3280
Transmission
Synchro Shuttle Gearbox
Purchased from www.WorkshopManuals.co.uk
1
2
3
4
5
6
7
Section F
113 - 1
S232720
S232720
S407220
S407250
Issue 2*
Advertisement
Table of Contents
