Synchro Shuttle Gearbox Dismantling - jcb 214e Service Manual

Backhoe loader

Hide thumbs Also See for 214e:

Table of Contents

www.WorkshopManuals.co.uk

Cleanliness is of the utmost importance when servicing the

gearbox. All precautions to prevent any ingress of dirt, grit

etc. must be taken. To this end wash the exterior of the

gearbox assembly as follows;

Make sure that all open ports and orifices are effectively

plugged. Remove any deposits of dirt, grit and oil from the

outer casings using a suitable degreaser and water. Dry the

Note: For details of service tools refered to, see Service

Tools at the front of this section.

Note: If the main hydraulic pump has not been removed,

remove it. Support the pump, undo the 2 fixing bolts A and

then withdraw the pump from the gearbox.

Remove t he c irc lip and t hen w it hd raw t he p ump

driveshaft 1a together with its bearing 1b.

Remove and discard the shaft sealing ring.

Transmission

Synchro Shuttle Gearbox

Purchased from www.WorkshopManuals.co.uk

4cx 3cx 214 215 217