jcb 214e Service Manual page 194

www.WorkshopManuals.co.uk
Section C
145 - 2
Earth Points
Introduction
The illustartion opposite shows the machine electrical earth
point locations. This can be useful when tracing electrical
faults, typically when several electrical devices are
malfunctioning.
Key
Decription
A Earth strap, cab. From DR2 to cab frame.
C47 Earth, cab roof harness.
DR2 Earth, side console harness.
E Earth cable E, cab to engine.
E1 Earth cable E, cab end.
E2 Earth cable E, engine end.
F Earth cable F, engine to battery.
F1 Earth cable F, engine end.
F2 Earth cable F, battery end.
FB1 Earth, front console harness.
G Earth strap, starter motor.
H Earth, work lights harness.
MB Earth at starter motor, engine/mainframe harness.
NJ Earth at battery, engine/mainframe harness.
†
The illustration opposite shows the battery earth cable
connection for machines not fitted with a battery isolator
switch. Machines fitted with a battery isolator P have earth
cable connections as shown below.
9803/3280
Harness Data
†
F
Purchased from www.WorkshopManuals.co.uk
Electrics
Access
Remove loader control console.
Remove - inside cab: 'B' post covers, roof lining.
Outside cab: lift moulded roof panel.
Remove side console.
Undo one side on the flexible grey moulding at the front on
the cab (outside).
Remove engine side panel.
Remove engine side panel.
Remove front grille.
Remove front console, see Section B, Body and Framework.
Remove engine side panel.
Remove - inside cab: 'B' post covers, roof lining.
Outside cab: lift moulded roof panel.
Remove engine side panel.
Remove front grille.
P
Section C
145 - 2
A404120
Issue 1