Rear Axle - jcb 214e Service Manual

www.WorkshopManuals.co.uk
Section F
3 - 2

Rear Axle

Note: It is essential that the correct ratio axle in relationship to the gearbox ratio is fitted to the machine. Do not fit a new axle
with a different ratio to the axle being replaced.
ALL WHEEL STEER MACHINES
Type
Designation
Installation
Number of steer rams
Weight (dry, with no steer rams
and without wheels)
Half (Axle) Shaft Braking/Type
Input Type
Oscillation
Toe - in
Castor Angle
Camber Angle
King - pin inclination
Hub Reduction
Ratios
Overall
Crownwheel and Pinion
Number of Teeth
Crownwheel
Pinion
2 WHEEL STEER MACHINES
Type
Designation
Installation
Weight (dry and without wheels)
Half (Axle) Shaft Braking/Type
Input Type
Hub Reduction
Ratios
Overall
Crownwheel and Pinion
Number of Teeth
Crownwheel
Pinion
9803/3280
Transmission
Technical Data
3 piece, JCB spiral bevel input with epicyclic hub reduction and inboard
braking. Pinion mounted park brake disc.
SD80
Rigid pad mount
1 (Double rod)
410 kg (904 lbs) approx.
5 friction plate, 6 counter plate (each half shaft)
Yoke
± 5°
0 °
0 °
1 °
0 °
5.4:1
OPTION 1
15.78:1
2.923:1
38
13
3 piece, JCB spiral bevel input with epicyclic hub reduction and inboard
braking. Pinion mounted park brake disc.
PD70
Rigid pad mount
386 kg (851 lbs) approx.
5 friction plate, 6 counter plate (each half shaft)
Yoke
5.4:1
OPTION 1
15.78:1
2.923:1
38
13
Purchased from www.WorkshopManuals.co.uk
OPTION 2 OPTION 3
18.16:1 13.7:1
3.363:1 2.538:1
37 33
11 13
OPTION 2 OPTION 3
18.16:1 13.7:1
3.363:1 2.538:1
37 33
11 13
Section F
3 - 2
Issue 1