Braided Cutting Wire; Long Knife; Nylon Spatula; Rubber Spacer Blocks - jcb 214e Service Manual

www.WorkshopManuals.co.uk
Section 1
4 - 3
Service Tools (cont'd)
Section B - Body & Framework
Braided Cutting Wire - consumable heavy duty cut-out
wire used with the glass extraction tool (above).
JCB part number - 892/00849
(approx 25 m length)

Nylon Spatula -

general tool used for
smoothing sealants - also
used to re-install glass in
rubber glazing because metal tools
will chip the glass edge.
JCB part number - 892/00847
Slide Hammer Kit - 993/68100
1 :993/68101 Slide Hammer
2 :993/68102 End Stops
3 :993/68103 Adaptor - M20 x 5/8" UNF
4 :993/68104 Adaptor - M20 x 1" UNF
5 :993/68105 Adaptor - M20 x M20
2
S196910
9803/3280
General Information
S186330
S186470
6
7
8
9
10 :993/68110
11 :993/68111
11
1
7
Purchased from www.WorkshopManuals.co.uk
Long Knife - used to give extended reach for normally
inaccessible areas.
JCB part number - 892/00844
Rubber Spacer Blocks - used to provide the correct
set clearance between glass edge
and cab frame.
JCB part number - 926/15500
(unit quantity = 500 off)
S186550
:993/68106 Adaptor - M20 x M24
:993/68107 Bar - M20 x M20 X 800MM
:993/68108 Adaptor - M20 x 7/8" UNF
:993/68109 Adaptor - M20 x M12
Adaptor - M20 x 5/8" UNF (Shoulder)
Adaptor - M20 x 1/2" UNF
2
2
6
9
8
Section 1
4 - 3
S186360
5
3
4
10
Issue 1