Table of Contents
Advertisement
www.WorkshopManuals.co.uk
Section F
36 - 2
Synchro Shuttle Gearbox -
2WD CANNOT BE ENGAGED
No pressure is required to engage 2WD(spring loaded). Check that the solenoid spool is not sticking (in the 4WD position),
then see below.
Possible Cause
10
Incorrect type of solenoid valve fitted.
11
Non-return valve faulty (noticeable because 2WD
cannot be engaged).
12
2/4WD solenoid permanently energised.
9803/3280
Transmission
Fault Finding
2/4 Wheel Drive Clutch (cont'd)
Purchased from www.WorkshopManuals.co.uk
Remedy
10
Check solenoid.
Note: Powershift and Syncro Shuttle machines
have different types of solenoid - check parts list.
11
Check the non-return valve.
12
Check the 2/4WD relay and select switch, replace
as necessary.
Section F
36 - 2
Issue 1
Advertisement
Table of Contents
