Cab Rops/Fops Structure - Checks - jcb 214e Service Manual

www.WorkshopManuals.co.uk
Section B Body & Framework Section B
22 - 1 Service Procedures 22 - 1

Cab ROPS/FOPS Structure - Checks

! WARNING
The machine is fitted with a Roll Over Protection
Structure (ROPS) and a Falling Objects Protection
Structure (FOPS). You could be killed or seriously injured
if you operate the machine with a damaged or missing
ROPS/FOPS. If the ROPS/FOPS has been in an accident,
do not use the machine until the structure has been
renewed. M odifications and repairs that are not
approved by the manufacturer may be dangerous and
will invalidate the ROPS/FOPS certification.
INT-2-1-9/3
Failure to take these precautions could result in death or
injury to the operator.
Check the structure for damage. Check that the mounting
bolts are installed and undamaged. Check the bolt torques.
Tighten them to the correct torque if necessary.
Torque Settings
Bolts A 205 Nm (150 lbf ft)
Bolts B 476 Nm (352 lbf ft)
A
B
S260180
9803/3280 Issue 1
Purchased from www.WorkshopManuals.co.uk