www.WorkshopManuals.co.uk
Section C
Electrics
Section C
30 - 1
Alternator
30 - 1
Removal and Replacement
Disconnect cables from rear of alternator, remove bolts A, B
and C and withdraw unit from machine.
Replace by reversing the removal sequence. Position the
B
alternator until belt deflection is approximately 10mm (3/8 in)
before tightening bolts B and C. It may be necessary to
A
slacken bolt D to allow full movement of alternator. Tighten
bolt A last of all.
S099850A
C
D
S099850B
9803/3280
Issue 1
Purchased from www.WorkshopManuals.co.uk