Front Axle - jcb 214e Service Manual

www.WorkshopManuals.co.uk
Section F
3 - 1

Front Axle

Note: It is essential that the correct ratio axle in relationship to the gearbox ratio is fitted to the machine. Do not fit a new axle
with a different ratio to the axle being replaced.
ALL WHEEL STEER MACHINES
Type
Designation
Installation
Weight
(dry, with no steer rams and without wheels)
Overall Gear Ratio
Crownwheel and Pinion Ratio
Number of Teeth
Crownwheel
Pinion
Hub Reduction
Input Type
Oscillation
Toe - in
Castor Angle
Camber Angle
King - pin inclination
2 WHEEL STEER MACHINES (4 Wheel Drive)
Type
Designation
Installation
Weight
(dry, with no steer rams and without wheels)
Hub Reduction
Input Type
Oscillation
Toe - in
Castor Angle
Camber Angle
King - pin inclination
Ratios
Overall
Crownwheel and Pinion
Number of Teeth
Crownwheel
Pinion
2 WHEEL STEER MACHINES (2 Wheel Drive)
Type
Installation
Weight
(dry, with steer ram and without wheels)
Oscillation
Toe - in
Castor Angle
Camber Angle
9803/3280
Transmission
Technical Data
JCB spiral bevel input with epicyclic hub reduction
SD70
Centre pivot
385 kg (850 lbs) approximately
24.975:1
4.625:1
37
8
5.4:1
Yoke
± 5°
0°
0°
1°
0°
JCB spiral bevel input with epicyclic hub reduction
SD55
Centre pivot
330 kg (728 lbs) approximately
5.4:1
Yoke
± 5°
0 °
0 °
1 °
0 °
OPTION 1
16.2:1
3:1
33
11
JCB centre oscillation, non-driven
Centre pivot
239 kg (525 lbs) approximately
± 5°
0°
0°
3 ° positive
Purchased from www.WorkshopManuals.co.uk
OPTION 2
19.2:1
3.556:1
32
9
Section F
3 - 1
Issue 1