Table of Contents
Advertisement
www.WorkshopManuals.co.uk
Section F
110 - 2
Dismantling (cont'd)
3
Drain the oil from the casing by removing the suction
strainer 3a. Remove and discard the oil filter 3b.
If the gearbox is fitted with a 2/4 wheel drive unit B,
4
remove it. For the correct procedure see Hydraulic 2/4
wheel Drive Unit, Dismantling .
5
Unscrew bolts and withdraw pump.
6
Remove and discard pump sealing ring.
7
Separate pump components. Note that the pump
components are held together with a security screw at
the rear of the assembly.
8
Remove and discard oil seal from pump housing.
9803/3280
Transmission
Synchro Shuttle Gearbox
Purchased from www.WorkshopManuals.co.uk
5
7
8
Section F
110 - 2
3b
3a
B
A395360
6
221021
Issue 1
Advertisement
Table of Contents
