Removing A Modality - AGFA Drystar 5300 Reference Manual

Removing a modality

1
Perform steps 1 to 2 of the
on page 59.
2
On the Change settings menu, press the Down key twice, followed by the
Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
1 Printer AE_Title
2 Hostname
3 Domain name
4 Printer IP address
5 Serv. Host IP add.
6 Netmask
7 Router IP address
8 Remove modality
9 Add modality
10 Alert mailing
3
On the 'Network (DICOM)' screen, press the Down key seven times, followed
by the Confirm key to select 'Remove modality'.
The 'Remove modality' screen is displayed:
1 Modality16char
2 Modality16char
3 Modality16char
4 Modality16char
5 etc...
The modality names - entered during the installation of the printer - are shown in the
list. If no names have been entered, the modality AE_Titles are shown instead. If a
nickname (daily used modality name) is also defined during installation, the
nickname is used.
4
Select the modality you wish to remove by means of the arrow keys, and
press the Confirm key.
A confirmation screen is displayed:
Delete modality
Modality16char
YES (v) NO (x)
5
Press the Confirm key (YES) to remove the modality from the list, or the
Escape key (NO) to quit the procedure without any changes.
2920B EN 20031206
'Accessing the Change settings menu'
CS
CS
CS
procedure
79