AGFA Drystar 5300 Reference Manual page 49

Accessing the Show settings menu
1
Press the Key-operator key to enter the key-operator mode.
2
On the key-operator main menu, press the Confirm key to select 'Show
settings'.
The Show settings menu is displayed:
1 General
2 Input tray
3 Network (DICOM)
4 Image quality
5 Installed data-sets
6 Logical printers
" This menu is the starting point for viewing printer information
(see next page).
3
Press the Escape key to return to the key-operator main menu.
4
Press the Escape key again to quit the key-operator mode.
2920B EN 20031206
SH
49