AGFA Drystar 5300 Reference Manual page 11

Transport after installation
Before moving the printer, always switch off the machine. The Drystar 5300
should always be transported by 2 persons. When doing this, the stability and
the structure of the table top have to be taken into account. The printer should
not be placed on a soft surface, since this might prevent appropriate
ventilation and cause overheating. The printer must only be transported with
all covers closed. The appliance may not be transported continuously from
one location to the other. Do not lift the printer by the output tray.
Waste disposal and environmental regulations
In most countries Drystar film is considered industrial waste and
consequently it is not allowed to be disposed as household waste. Please
consult your local waste disposal regulations. Agfa recommends having
waste Drystar film collected by a licensed company.
After its life span, do not dispose of the Drystar 5300 without consideration of
local waste disposal regulations. Please consult your local service
organization.
11
2920B EN 20031206