AGFA Drystar 5300 Reference Manual page 180

3
Open the print head unit.
The print head unit can be warm.
4
Gently remove the film sheet(s).
" Never use force to clear the jammed film. If it is not possible to gently
remove the jammed film by pressing the transport buttons, proceed with
the procedure as follows.
" Verify that no film sheets remain in the print head compartment.
5
If the film jam has been cleared, close the printer. You can resume work.
" If the jam is still not cleared, call your local service organization.
180
2920B EN 20031206